Good Quality Glass Wave Beveling Machine – automatical chain system variable angle glass edging mitering machine – Zhengxing
Good Quality Glass Wave Beveling Machine – automatical chain system variable angle glass edging mitering machine – Zhengxing Detail:
ZX845G/ ZX945G/ZX10.4G
Chain conveyor
Variable angle rotation system
Machine Introduction
This machine perform normal edge polishing and miter edge polishing
a) Control system:
This machine use PLC control and touch panel operating system. The machine can run in automatic mode and manual mode.
b) Variable angle change range
The five bottom wheel can adjust angle from 0 degree to 45 degree. The rotation system use twin shafts supporting structure, the motor beam is supported from two ends which give a very good balance and keep same precision during rotation.
c) Cooling water system.
The wheel tank of frontal 5 wheels adopts rotation system, which can adapt to the wheel according to the angle.
d) Basement and frame:
Are made of fabricated iron after heat treatment to ensure stability and solidity.
e) Conveyor:
chain transmitting system, pads move along the beam, rubber is fixed on the nylon pads.
The machine has a reinforced middle support. This has a important role to rectify the conveyor straightness in case it get some deformation in a long run.
f) Basement, support, conveyor
Are made of cast iron to ensure stability and solidity
g) This machine use high quality CDQC motor
h) Front rail movement:
Motorized, it can move in parallel to adapt to different glass thickness.
i) Loading/off loading conveyor
Time belts, the loading belts can adjust height to get different glass removal.
j) Glass support frame use Aluminum extrusion bar, with plastic rollers.
k) Working speed adjustment:
through speed regulator, manually.
l) Amperometer meter:
check the wheel pressure.
m) Spindles for arris adopt drag plates structure, which is no vibration in working.
n) Water system
Water is circulated in the machine and stainless water tank. Wheel tank outlets connect with one stainless drain pipe which is very easy for installation. (pic.IV). The square water tube for water inlet is connected with each wheel nozzle.
Technical parameters
|
Item |
Parameter | Range |
|
1 |
working speed: |
0.8-3.8m/min |
|
2 |
Glass thickness: |
3-25mm |
|
3 |
Miter angle: |
0- 45° |
|
4 |
Front miter removal : |
15 mm |
|
5 |
Min. glass size: |
100×100 |
|
6 |
Overall dimension(L.W.H): |
6900x1000x2500mm |
|
7 |
Weight: |
3000kg |
|
8 |
Installed power: |
18kw |
Product detail pictures:
Related Product Guide:
As for aggressive costs, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such high-quality at such rates we have been the lowest around for Good Quality Glass Wave Beveling Machine – automatical chain system variable angle glass edging mitering machine – Zhengxing , The product will supply to all over the world, such as: Florida, Southampton, New Zealand, Our solutions have national accreditation standards for experienced, premium quality items, affordable value, was welcomed by people around the globe. Our goods will continue to increase in the order and look forward to cooperation with you, Really should any of those products be of interest to you, please letus know. We are going to be pleased to give you a quotation up on receipt of one's detailed specifications.
By Joyce from Detroit - 2018.06.18 17:25
This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
By Steven from South Korea - 2018.11.11 19:52
