Welcome to our websites!

Chinese Professional Manual Glass Edging Machinery - chain system automatic glass flat edge polishing machine puenmatic – Zhengxing

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

It adheres on the tenet "Honest, industrious, enterprising, innovative" to acquire new solutions continuously. It regards prospects, success as its personal success. Let us build prosperous future hand in hand for Horizontal Glass Sandblasting Machine, Glass round edge double edging machine, Glass Edge Seaming Machine, Welcoming interested businesses to cooperate with us, we look forward to owning the opportunity of working with companies around the planet for joint expansion and mutual results.
Chinese Professional Manual Glass Edging Machinery - chain system automatic glass flat edge polishing machine puenmatic – Zhengxing Detail:

xiangqingpic1

ZX10.325C

Mitsubishi PLC control and touch panel operating system

reinforced middle support

reinforced middle support

Motorized to adjust different glass thickness

Motorized to adjust different glass thickness

high quality drive motor-Starlight brand

high quality drive motor- Starlight brand

high quality motor-CDQC brand

high quality motor- CDQC brand

Machine Introduction

a) Control system:

This machine use PLC control and touch panel operating system.  The machine can run in automatic mode and manual mode  In manual mode, the polishing wheel can still work in air system.  The big advantage is this machine separate the control system with electrical system, so the machine can work even the automatic system has fault.

 b) Basement and frame:

Are made of thick iron to ensure stability and solidity

c) Conveyor:  

chain transmitting system,pads are connected by the two chains.  Pads are made of nylon, stretchy rubber pad is attached on the nylon base.  Rubber pads can be replaced after it wear off.  

The machine has a reinforced middle support.  This has a important role to rectify the conveyor straightness in case it get some deformation in a long run. (Pic. II)

 d).  Loading/offloading conveyor:

Timing belt.  It can adjust height to set different glass removal.  The height is shown on disk readout.  

d) A manual lubrication oil pump can pump the lubrication oil to the sliding plates for motor movement and front conveyor movement.  The front and back conveyor need to be lubricated by grease manually smeard.

e) Front rail movement:  

Motorized, it can move in parallel to adapt to different glass thickness. (Pic. II)

 f) Working speed adjustment:  

through speed regulator (drive motor), manually, the speed is shown on digital meter.  The drive motor made by Starlight company, which is a high quality factory in China.  

g) Working motor is made by CDQC.

h) Water system

Water is circulated in the machine and stainless water tank.  Wheel tank outlets connect with one stainless drain pipe which is very easy for installation. (pic.IV). The square water tube for water inlet is connected with each wheel nozzle.

i) Glass support frame

Use aluminum bar with blue plastic roller.

j) Amperometer meter:

check the wheel pressure. 

k) Spindles for arris adopt drag plates structure, which is no vibration in working. 

Technical parameters

Item Parameter Range
1 Working Speed: 0.8-4m/min 
2 Glass thickness: 3mm-25mm 
3 Total Weight: 3200kg 
4 Min. glass Size: 80mmx80mm
5 Base Dimension: 7×1×2.5m
6 Total power: 20kw 

xiangqingpic2


Product detail pictures:

Chinese Professional Manual Glass Edging Machinery - chain system automatic glass flat edge polishing machine puenmatic – Zhengxing detail pictures


Related Product Guide:

Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for Chinese Professional Manual Glass Edging Machinery - chain system automatic glass flat edge polishing machine puenmatic – Zhengxing , The product will supply to all over the world, such as: South Korea, Georgia, Romania, With a fully integrated operation system, our company has won a good fame for our high quality products, reasonable prices and good services. Meanwhile, we have established a strict quality management system conducted in material incoming, processing and delivery. Abiding by the principle of "Credit first and customer supremacy", we sincerely welcome clients from home and abroad to cooperate with us and advance together to create a brilliant future.
  • We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
    5 Stars By tobin from Malaysia - 2018.09.21 11:44
    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Patricia from India - 2017.07.28 15:46
    Write your message here and send it to us